1080P Distortion free USB Camera Standard Module

Module No.

YXD53G2-R003A1 V1.0

Module Size

W×L×H: 38×38×17.6mm

Temperature (Operation)

-30°C to 85°C

Temperature (Stable Image)

-20°C to 60°C

Assembly technique

SMT (ROSH)

Focus

FF

Object distance

30CM -> +∞

Resolution

TBD

Interface

USB 2.0

Power

USB bus power(DC5V)

Operating system request

Win XP、Win 7、Win 8\ Android

Package

Anti-electrostatic tray

Certifications

FCC and CE

Sensor Type

(1/3”)

Active Array Size

1920(H) x 1080(V)

Pixel Size

2.8µm x 2.8µm

Maximum Image Transfer Rate

1080P 30fps

Lens 1

650nm COLORFUL

Lens Construction

4E+IR650

F/No

2.5mm

Focal Length

3.1mm

FOV（D）

90°

TV Distortion

＜0.5%

Relative Illumination

>53.5%

DSP Type

2.0USB PORT DSP

AGC/AEC/Whiter balance

Auto

Appearance

Serial Number

project

Require

Testing method

Unqualified classification

1

The appearance of the module

The surface of the module is free of dirt and visible scratches, and there are no impurities in the plastic

8X magnifying glass

A

2

lens

When inspecting with a head-up, 45-degree reflected light under a light intensity of 800±100Lux, there must be no visible scars or dirt visible to the naked eye

8X magnifying glass

 A

3

thread glue

Dispensing length is 1/3-1/2 of the circumference, and the glue cannot overflow to the lens end surface and lens base

8X magnifying glass

 A

4

sealant

The base and FPC should be evenly filled with sealant, without gaps, uneven thickness, or glue overflowing beyond the edge of the FPC, resulting in excessive external dimensions

8X magnifying glass

A

5

PCB

1) The surface is free of dirt and the printed characters are clear; 2) The edge burr length is less than 1mm, the width is less than 0.3mm; 3) The length of the edge gap is less than 1mm, the width is less than 0.1mm, no more than 2 on each edge

45X microscope

(continuous zoom)

A

Dimensions

Serial Number

project

Require

Testing method

Unqualified classification

1

high

Meet drawing requirements

digital caliper

A

2

length

Meet drawing requirements

digital caliper

A

3

width

Meet drawing requirements

digital caliper

A

Optical performance inspection requirements

serial number

Test items

Require

Testing method

Unqualified classification

1

Dust

Under the white field, obtain the image and visually inspect the entire screen. No visible foreign matter is allowed to exist.

Test fixture. Small light box. 6500K white backlight

A

2

Imaging direction

Meet drawing requirements

Test Fixture

A

3

Dead & Wound Pixel

 Under dark field: the total number of bright spots is less than 400 pixels; the clustered bright spots of two adjacent pixels are less than 20; there are no clustered bright spots of more than 3 pixels.

Under white field: the total number of dark spots is less than 400pixels; cluster type of 2 adjacent pixels

 The number of dark spots is less than 20; there are no clustered dark spots of more than 3 pixels.。

Test software and small light box

(6500K white backlight)

A

4

Resolution

2 million pixels: center not less than 1000LW/PH

MTF test program

A

5

FOV（D）

Diagonal:75°

Test fixture, field of view angle standard board

A

6

Shading

The average brightness at 90% of the test site from the four corners to the center should at least reach the brightness of the center test site

 More than 45%; the brightness of each corner reaches more than 35% of the center brightness (the sampling frame size is 40*40 pixels, and the sensor vignetting compensation function is not turned on).

testing software,

Small light box (3400Lux, 6500K white backlight)

A

7

Color

The color reproduction error is no more than 20%

Color checker card

A

8

TV distortion

Neither pincushion distortion (positive number) nor barrel distortion (negative number) is greater than 1%

Test software ISO12233 standard board

A

9

Grayscale

The brightness difference between two adjacent distinguishable gray levels must be less than 8

Test software, gray scale standard board

A

10

CA

less than 0.5

testing software

ISO12233 standard plate

A

11

Torsional

Not less than 1 kgf.cm

Torque meter

A

12

Thrust

Not less than 2N

thrust gauge

A

Reliability Specification

serial number

Test items

Conditions and requirements

Test equipment

1

Low temperature storage

-30℃, continuous test time 120H;

cryogenic chamber

2

Low temperature operation

-20℃, running test 8H

cryogenic chamber

3

high temperature storage

85℃, continuous test time 120H;

High temperature box

4

High temperature operation

70℃, continuous test time 120H;

High temperature box

5

High temperature and high humidity storage

40℃-85%, continuous test time 48H;

High temperature and humidity chamber

6

High temperature and high humidity operation

40℃-85%, running test 8H

High temperature and humidity chamber

7

Hot and cold shock test

-30℃)→70℃ (30min each) high and low temperature conversion time is less than 96H Total: 10cycles;

Low temperature box/high temperature box

8

Hot and cold shock test

free drop test

(after packaging)

Height 30--150cm, 10 times, the product has no appearance or functional problems;

oak floor

9

Vibration test

(after packaging)

10Hz～200Hz～10Hz, amplitude 2mm, XYZ three directions, vibration for 2 hours;

Vibration test bench

10

Static electricity test

(power outage)

150Pf, 330 ohm ±8KV, air discharge ±6KV, measured 10 times

Static electricity tester

 1. After the product has passed various reliability tests, the size, appearance, torque, and optical performance all meet the product requirements. 2.Test conditions: Illuminance: small light box 1500±10%LUX large light box 6000±10%LUX Color temperature: 4400±150K

PC test software MODULE test platform